To assess how varying degrees of corneal clearance of scleral contact lenses (ScCL) impact visual acuity (VA) and comfort in patients with corneal ectasia.Method:
Three ScCL were fitted to 20 subjects with previous diagnosis of either keratoconus (n=18) or pellucid marginal degeneration (n=2). Fitting of ScCL was based on corneal sagittal height (CSH) measured with Visante OCT at a 15-mm chord on the horizontal meridian. To select the ScCL from the diagnostic lens set, values of 325, 375, and 425 μm were randomly added in sequence to CSH. Subjects wore ScCL for 1 hr. Central corneal clearance (CCC) and topographic corneal clearance (TCC) along the vertical meridian were assessed using an ultralong optical coherence tomographer. High-contrast VA (HCVA) and low-contrast VA (LCVA) were measured using a logarithm of the minimum angle of resolution VA chart, and comfort ratings were obtained with a standard comfort scale (0–100).Results:
Mean CSH in the horizontal meridian was 3.78±0.53 (range: 3.33–4.17) mm at a 15-mm chord. Mean CCC was 190±100 μm (TCC: 160±94 μm at +3 mm and 180±94 μm at −3 mm), 360±120 μm (TCC: 260±100 μm at +3 mm and 330±110 μm at −3 mm), and 450±170 μm (TCC: 320±120 μm at +3 mm and 400±120 μm at −3 mm) for each lens (P=0.001). Mean HCVA for lenses 1, 2, and 3 were 0.05±0.12, 0.07±0.11, and 0.11±0.08 respectively, which were significantly different (P=0.02). Tukey post hoc analysis showed that this difference was only significant between lenses 1 and 3 (P=0.01). Similar findings were found for LCVA. Comfort ratings for lenses 1, 2, and 3 were 74.9±9.2, 79.7±11.6, and 78.6±10.8, respectively (P=0.24).Conclusion:
The CSH is an effective method of determining the appropriate lens/cornea relationship. Lens 2 (+375 μm) gave the best combination of acuity and comfort ratings. Evaluation of the fluorescein pattern must be balanced with VA and comfort ratings for successful fitting in a clinical setting.